Menu
OpenVPN does not, by default, save usernames and/or passwords, requiring you to enter this information each and every time you connect to a VPN server. While is this good from a security perspective, it can be an annoyance.
Download and install an OpenVPN client, such as TunnelBlick. Download the VPN profile for the gateway. This can be done from the point-to-site configuration tab in the Azure portal, or by using 'New-AzVpnClientConfiguration' in PowerShell. Unzip the profile. Open the vpnconfig.ovpn configuration file from the OpenVPN folder in a text editor.
![Openvpn Openvpn](https://help.itaf.eu/xwiki/bin/download/Security Services/OpenVPN remote access/OpenVPN installation on Mac OS X/WebHome/1_MAC_OSX_openvpn.png?width=679&height=283)
- VPN configurations to the Tunnelblick application which is what the alert is about. 7.)After running the Tunnelblick application you will see it added to your menu bar. Click on the Tunnelblick icon and select “ASUVPN Student” from the options provided.
- Understanding how split tunneling works with OpenVPN Access Server. A basic, personal VPN service, such as Private Tunnel, routes the user’s traffic to the Internet through an encrypted VPN tunnel. Someone might use the personal VPN service to protect themselves on public Wi-Fi or to get around geographic content restrictions.
Please see below for instructions to change this:
1. Locate the OpenVPN config folder on your computer. Please see below for details pertaining to your operating system / client (if using Mac) for typical file paths:
- Windows: C:Program Files (x86)OpenVPNconfig
- Linux: /etc/openvpn
- Mac (Using Tunnelblick): ~/Library/Application Support/Tunnelblick/Configurations
- Mac (Using Viscosity): ~/Library/Application Support/Viscosity/Configurations
![Openvpn Tunnelblick Openvpn Tunnelblick](/uploads/1/1/7/7/117749585/510742646.png)
2. Create a new text file in the Configurations file; name the newly-created file 'auth.txt', and enter the following information. Save the file one you have entered the following 2 lines:
- 1st line of text file: Enter only your account username
- 2nd line of text file: Enter only your account password
3. Open your OpenVPN configuration file (.opvn extension) in a text editor (If you are on a Windows computer; open the file using Notepad++ instead of Notepad). Locate 'auth-user-pass', and change this read as 'auth-user-pass auth.txt' (the newly-created file which contains your username and password). Save this file.
4. Restart your OpenVPN client.
5. Connect to one of our servers. You will now be able to connect to our servers without having to enter your username and password again.
Please contact us if you have any questions or need assistance at anytime!
Tunnelblick Windows Download
Highlighted Articles News Installing Tunnelblick Uninstalling Tunnelblick Setting up Configurations Using Tunnelblick Getting VPN Service Common Problems Configuring OpenVPN Release Notes Thanks FAQ Discussion Group Read Before You Post | On This Page If OpenVPN is connected to the server but you can't access the Internet How to check your DNS settings How to use a different DNS server Use a different DNS server whether or not a VPN is active Use a different DNS server only when the VPN is active If OpenVPN is connected to the server but your IP address does not change How to test your IP address Troubleshooting this problem could be very simple: try connecting the VPN with and without 'Set nameserver' selected. If one way or the other solves your problem, you're done! OpenVPN is such a powerful tool with so many options, and computer configurations are so varied, that it is impossible to have an exhaustive troubleshooting guide. This guide is meant for the most common setups, so if it doesn't apply to your situation, or doesn't help, see the Support page for guidance. This page assumes that you are successfully connected to a VPN server. If not, or if you aren't sure, look at Common Problems. If OpenVPN is connected to the server but you can't access the InternetAfter connecting, if you can't reach the Internet, it's likely that your setup has
Tunnelblick includes the ability to diagnose some DNS problems and will warn you about some common configuration problems. Check for a DNS problem: If OpenVPN connected to the server properly, but you are having trouble connecting to websites, the first thing to find out is if there is a DNS problem. To check that, try to access a website by using its IP address instead of its name. If the IP address works, but the name doesn't, there is a DNS problem. (Consider the IP address to be 'working' if any of the webpage loads.) If you don't have a DNS problem then there is something else going on. See the Support page for guidance. If you have a DNS problem:
How to check your DNS settings
Note: If the DNS server list is dimmed (grayed out), it was set via DHCP, not manually. How to use a different DNS serverThere are two ways to set up a different DNS server: Use a different DNS server whether or not a VPN is activeYou can set your computer up to use a different DNS server all the time. Google Public DNS is free, and OpenDNS has a free version. There are lots of others. To use such a DNS server all the time (whether or not a VPN is connected):
This will set up your computer to always (whether or not you are connected to the VPN) use two Google DNS servers and two OpenDNS servers (in that order). Substitute the addresses for the DNS provider of your choice if you want. Use a different DNS server only when the VPN is activeNote: This will only work if you specify 'Set nameserver' in Tunnelblick's settings for the configuration. Add a line to your OpenVPN configuration file for each DNS server: ' dhcp-option DNS address' (substitute the DNS server's IP address for address). (To add two servers, add two lines to the OpenVPN configuration file, one for each server.)If OpenVPN is connected to the server but your IP address does not changeIf you have a check in the 'Check if the apparent public IP address changed after connecting' checkbox on the 'Settings' tab of Tunnelblick's 'VPN Details' window, and your IP address doesn't change after connecting, a window will pop up to notify you. If OpenVPN connects to the server properly but your IP address does not change, your OpenVPN setup needs to include the '--redirect-gateway' option. By default, OpenVPN only sends some traffic through the VPN — traffic that is specifically destined for the VPN network itself. The '--redirect-gateway' option tells OpenVPN to send all IPv4 traffic through the VPN. There are three ways the option can be added; you need only use one:
(The '--' at the start of an OpenVPN option is omitted when the option appears in a configuration file.) How to test your IP addressYou can find out what IP address your computer is using by going to https://tunnelblick.net/ipinfo. The first number shown is your apparent public IP address: Note: tunnelblick.net does not use Javascript, other client-side scripting, plugins, trackers, beacons, or web bugs, and it does not carry advertising. It does not store cookies or any other data on your computer (except as noted in the tunnelblick.net privacy policy). If you have checked 'Check if the apparent public IP address changed after connecting', the IP address will be displayed in the Tunnelblick menu while you are connected: |